Tunap valve cleaning system considered “necessity in modern workshop”

Jason Bowden, a diagnostic technician from Torquay, explains how Tunap valve cleaning system can help boost profit

Tunap valve cleaning system considered “necessity in modern workshop”
Tunap's valve cleaning system has been praised by a garage for dramatically reducing inlet valve cleaning time.

The Tunap valve cleaning system is approved by Vauxhall, Mazda, Peugeot Citroen, Fiat Chrysler, Suzuki and several commercial brands as “the only recommended fix”.

Carbon build up on the inlet valves is a common problem that many independent garages face, with some having tried methods which have had little effected but led to expensive, labour intensive dismantling of component parts to clean or replace them and hiking up the overall repair cost.

To avoid this, Tunap worked closely with major car manufacturers to find a quick and effective solution to this issue; the result is the Tunap valve cleaning system, which works with all brands of vehicle.

Easy to use, the cleaning process can be finished in just under two and a half hours for a standard four-cylinder engine.

This will remove the carbon build up inside the valve and restored back to an “as good as new” condition.

“Proven fix”

Jason Bowden, of Bowden Auto Services in Torquay, commented: “Over the years we have owned, used and tested many inlet cleaning systems, none worked perfectly, some were near useless and just a complete waste of time.

“Using the Tunap bead cleaning system has now given us a proven fix that involves minimal stripping, reducing time and money spent on each job.

“With patience and practice you can achieve one-hundred per cent clean with the Tunap system, we can now legitimately say we can get the same results as a full cylinder head and valve strip.

“As with all processes the end result is only as good as the effort and skill put in by the user, some practice and patience is needed but pays off in the end result.

“With more and more vehicles using direct injection the carbon build-up and problems associated with it will become more common, and as such we consider this tool a necessity in the modern workshop.”

For further information about Tunap call 01732 365163 or click ‘more details’ below.

Have your say!

5 0

Lost Password

Please enter your username or email address. You will receive a link to create a new password via email.