BG Products has revealed the effectiveness of its BG 9300: a complete DPF and emissions system service which cleans from the air intake right through the engine to the DPF.
Having spent four years looking at the problem of blocked DPFs, BG Products reached the conclusion that cleaning a DPF in isolation will only defer the problem, not cure it.
For that reason, BG Products developed a system to clean DPFs and restore engine combustion efficiency, thus prolonging DPF life and restoring economy.
To demonstrate its effectiveness, BG Products has provided supporting evidence to verify the difference that the BG 9300 can make.
One motorist brought in their 2014 Vauxhall Astra which had 2950 miles on the clock, after the DPF light came on and technicians were unable to regenerate it with the Scan Tool.
The owner had been advised that a new DPF would need to be fitted to solve the problem, but after a BG 9300 service it went from 57 mBar to -1 mBar.
An Audi owner was warned that their vehicle was at risk of fire, but a BG 9300 service eliminated this risk, leaving the vehicle clean and safe.
Pre-test data on a customer’s Ford Focus 1.6 HDI TDI showed that the vehicle’s pressure was 30.8 mBar at idle and 44.8 mBar at 1500RPM.
At the end of the BG 9300 service the pressure was recorded as 2.88 mBar.
The price for the service and oil change was £570, after initially being quoted £1,772.20 for a new DPF and labour.
To read the full BG Products document, select ‘more details’.