Transmission support arm takes the wrestling out of gearbox removal jobs

Laser Tools creates a stable environment by supporting the gearbox from above

Transmission support arm takes the wrestling out of gearbox removal jobs

When combined with a traditional transmission jack, the patented Laser Tools transmission support arm (part number 8579) simplifies gearbox removal and fitting by supporting the gearbox from above.

The specially-shaped arm goes up the side of the gearbox and gives an attachment point to hang the support-strap and chains supplied.

Because the gearbox is hanging from the support it is much easier to manoeuvre, both in and out of position. The Laser transmission support arm turns a transmission jack from an underneath support, into a much more stable over-the-top support, while still maintaining the ability to work from underneath.

With a 200kg safe working load, it provides dramatic time reductions in the removal and replacement of the gearboxes. It also improves stability, requiring only one person and hands-free operation.

It works well with the Laser Tools 5750 engine support and 4842 support beam.

The support arm can be used in a wide range of applications, including Citroën Berlingo van, Fiat 500, Ford Fiesta, Focus, KA and Kuga, Mini, Honda Civic, Honda CR-V, Land Rover Defender, Nissan Navara (with transfer), Peugeot 207 and 208, Renault Trafic, Renault Captur, Vauxhall Vivaro, Volvo XC90, and VW Touran, Tiguan and Golf.

The Laser transmission support arm is available now from your Laser Tools stockist.

Have your say!

0 0

Lost Password

Please enter your username or email address. You will receive a link to create a new password via email.