REPXPERT INA and FAG training day gets 10/10 rating

Course covered INA belt system and FAG wheel bearing technology best practice, installation and problem diagnosis

REPXPERT INA and FAG training day gets 10/10 rating

Schaeffler’s latest training day at the REPXPERT Academy in Hereford has been rated ‘10 out of 10’ by one of the attending technicians.

Members were given some practical demonstrations before being set a number of tasks by REPXPERTs Tim Adams and Andrew Vaux.

One invaluable session was how to accurately install an INA timing belt tensioner on either a VAG 1.9-litre or 2.0-litre TDi, using the INA-designed stud alignment tool to help avoid potentially expensive belt system failures.

Tim and Andrew also showed the group how to change the timing belt on a Ford 1.8TDCi, illustrating how using best practice can help avoid system failure.

The pair revealed that the method can also be applied to Vauxhall, Honda, Renault, VAG, Range Rover and Iveco applications.

The delegates were also presented with INA front end auxiliary drive (FEAD) systems, incorporating multi-ribbed belts, overrunning alternator pulleys (OAP) and overrunning alternator decouplers (OAD), as well as the INA crankshaft pulley decoupler fitted to BMW, Volvo and Vauxhall applications.

Another aspect of the training was an analysis of different timing drive configurations, as well as the latest intelligent water pump designs and thermal management technology.

Switching to FAG, the REPXPERTs gave practical demonstrations of the Hub 2.1 (Gen.2) wheel bearing, showing how to use the special tools that are required to guarantee a safe and correct installation.

There was also a presentation about wheel bearing evolution, and how this humble part has evolved to help to reduce fuel consumption and emissions.

One of the attending technicians, Gary Butler-Holmes, said: “I learnt a lot, and the course refreshed my memory on key factors.

“Highly regarded by all technicians – a 10 out of 10 from me.”

John Hall added: “The two presenters certainly had a wealth of knowledge between them on the subjects and were more than willing to get stuck in.

“They not only discussed the topics but demonstrated them as well.”

David Painter said: “I do like to have a full understanding of what tasks I am giving my staff, so we can try to avoid making expensive mistakes.

“What was of particular interest to me was the VAG stud tool and the FEAD drive with OAPs.”

Automechanika Birmingham

Schaeffler will be exhibiting at Automechanika Birmingham 2019 between the 4th and 6th June (19S140), and amongst the augmented and mixed reality exhibits, which will offer visitors the chance to experience the ‘garage of the future’, a series of new training dates will be announced.

As well as the popular INA and FAG module, there will be several new sessions that focus on LuK double clutches, which proved successful throughout 2018 and the early part of this year.

All these workouts are designed to prepare technicians for work entering their workshop now and in the future.

For further information about REPXPERT, select ‘more details’ below.

Have your say!

0 0

Lost Password

Please enter your username or email address. You will receive a link to create a new password via email.