TEXA highlights ADAS workshop equipment

Calibration required following sensor replacement, suspension work, wheel alignment and new tyres

TEXA highlights ADAS workshop equipment

Global supplier of vehicle diagnostic equipment, TEXA is this week promoting its offering for workshops.

Cameras, radars, LIDARs and sensors must be recalibrated when replaced, other repairs that require a recalibration includes, replacing the windscreen or bumper, repairing the suspension, aligning the wheels, changing the tyres and replacing the engine control units.

Knowing how to intervene in this field is strategical to keep pace with the times and to be able to offer customers a first-class service, TEXA advises workshops.

To assist repair professionals when operating on these active safety systems, TEXA offers a range of solutions for repairing

The RCCS3 digital is equipped with a 75-inch HD screen with 4k definition, this offers an optimal display, meeting the 1:1 proportion ratio in line with the specifications of every manufacturer.

The RCCS3 communicates with TEXA’s IDC5 software and guides the mechanic, step-by-step through the calibration process.

With TEXA’s continuous software updates, provides the customer with new vehicles, help sheets and panels with each release.

RCCS 3 is made up by a very robust main support, which height can be adjusted thanks to its electrical operation.

Using practical knobs, it can be easily tilted to the side and forward.

A handwheel and a laser level allow also performing millimetric side movements.

On top of the unit there is another laser level, very useful for finding the centre of the vehicle simply pointing it onto the front logo.

The horizontal adjustment bar is equipped with two distance measurers and a reflecting plate, the latter with a central laser for the front radar’s aiming.

RCCS 3 is easy to move within the workshop thanks to its oversized pivoting wheels.

This technological equipment allows positioning RCCS 3 and aligning it correctly with respect to the vehicle and to the ground easily, with absolute precision and in complete safety.

TEXA’s solutions must be used in combination with the IDC5 diagnostic software that allows completing any operation quickly.

In fact, the application provides specific diagnostic help sections for each make/model, with the instructions (such as panel height, distance from the vehicle, alignment, etc.) for the correct positioning of the unit, guiding you step-by-step throughout the procedures.

Furthermore, at the end of the calibration, you can print a report to hand over to the customer with the evidence of the operations carried out.

The TEXA ADAS System Complies to Specific OEM Method Statements and is Independently Certified by TUV Rheinland and TEXA’s ADAS equipment is the only aftermarket solution that guarantees the accuracy of its calibration.

For more information on TEXA ADAS solutions or to request a no-obligation demonstration, email m[email protected].

Have your say!

0 2

Lost Password

Please enter your username or email address. You will receive a link to create a new password via email.