Complete DPF and emissions system service has removed the need for DPF replacement

Cleaning service has cleared engine faults and successfully improved engine combustion efficiency

Complete DPF and emissions system service has removed the need for DPF replacement
BG Products' DPF and Emissions treatment has widely improved DPF regeneration and cleared engine faults.

BG Products, the manufacturer of power and economy-restoring devices, has revealed that its DPF and emissions system service has removed the need for DPF replacement and improved fuel economy, in numerous case studies.

In one instance, a 2014 Vauxhall Astra with 2,950 miles clocked came into a garage with the DPF light on, unable to regenerate with the Scan Tool, offering very poor driving conditions.

The owner was told a new DPF would need to be fitted to solve the problem.

After a service from the BG 9300 device, data readings changed from 57mBar to -1mBar (see below).

Removed fire risk

Soot mass was reduced by nearly 98 per cent during a separate case study involving an Audi.

The vehicle was declared a fire risk and warnings were made after a diagnostics scan to not attempt regeneration under any circumstances.

The results from the complete DPF and emissions system clean from the BG 9300 ensured that regeneration at a standstill would be possible thereafter (below).

No need for new DPF

The owner of a Ford Focus 1.6 HDI TDI with 74,677 miles clocked was told a new DPF was required after a scan tool could not undertake a regeneration.

The price for the new DPF and labour was quoted at £1772.20.

Pre-test data showed the vehicle’s pressure at 30.8 mBar at idle and 44.8 mBar at 1500RPM.

After the BG 9300 service, the graph shows the dramatic drop in pressure; at the end of the service, the pressure was recorded as 2.88 mBar.

Price for BG 9300 service and oil change with BG244/BG109/BG112 was £570, removing the need for a replacement DPF and saving the owner a large amount of money (see below).

Restoring performance

A 2.1L Jaguar from 2008 with 97,856 miles was brought in to a garage with 13 errors in total.

Following treatment with the BG 9300 DPF, pressure decreased from 409 mbar to just 1 mbar – restoring performance and eliminating all errors (see below).

BG Products manufactures devices to restore the power and economy of car engines.

To find out more about the BG 9300 DPF and emissions system service, click ‘more details’ below.

Have your say!

0 0

Lost Password

Please enter your username or email address. You will receive a link to create a new password via email.