Laser Tools voltage tester for 3-60V systems

It features a 3-metre-long spring-coiled lead with alligator clip

Laser Tools voltage tester for 3-60V systems

Laser Tools has unveiled a new voltage tester (part number 8599), which features a backlit LCD display, making it easy to read, even in poor lighting conditions.

It’s for direct current (DC) systems only and suitable for use on 3 to 60 volt systems, making it essential for use in the modern automotive workshop.

The stainless-steel test probe is two-position: pushed forward into the external position to measure voltage straight from a terminal or switch, or held within the hook to pierce and test an insulated wire.

Use the tester with confidence — reverse-polarity, over-voltage or connection to an AC system is instantly displayed as an error (with associated code) on the LCD display. The dual-colour display indicates polarity together with a data hold function that allows the measured value to be displayed on screen for three seconds after the probe has been removed from the voltage source.

This CE and UKCA compliant tester also features a 3-metre-long spring-coiled lead with alligator clip. Available now from your Laser Tools stockist or online by clicking here.

Have your say!

0 0

Lost Password

Please enter your username or email address. You will receive a link to create a new password via email.