This welder is equipped with dinse sockets, a Euro-Torch connector and a 0.7kg – 5kg wire spool size.
Current outputs are 30 – 200 amps MIG, 30 -170 amps ARC and 20 – 200 amps TIG.
SIP say the welder excels with thin body panels, the cutting edge inverter technology inside ensures a stable arc whilst maintaining optimised welding parameters.
Key features
- Welding mode select switch.
- Torch link lead.
- Amperage wire speed control knobs.
- Voltage control knob.
- LED output displays for amps and volts.
- Two torch and four torch control switch.
- Alarm.
- Welding light.
- 3m MB15 MIG torch with 0.8mm contact tip.
- 3m earth cable with earth clamp.
- 4m x 8mm Ø gas hose and hose clamp.
- Hand held face mask.
- Hammer/brush.
- Instruction Manual.
- 0.6, 0.9 and 1.0mm contact tip, 1pc for each.
- 0.2Kg – 0.8mm flux core wire.
This inverter welder is available now at a discounted price, select ‘more details’ below or email your postcode to [email protected] to find your nearest distributor.
Valid : Until April 30th 2016
