LIQUI MOLY highlights the tasks of motor oils

Why it's important to use the right oil

LIQUI MOLY highlights the tasks of motor oils

Why is it important to use the right oil? Can money be saved on engine oil and why does it need to be changed? LIQUI MOLY provides the answers.

Proper oil lubrication is vital to engine protection. A protective lubricating film is necessary for minimum wear and to prevent engine damage. While wear protection is extremely important, using a high-quality oil with an OE approval or specification can also help to further reduce internal friction while maximising performance and efficiency.

An oil will need to protect well in all operating conditions and during extreme engine loads. It will also need to provide max flow during cold start while at the same time prevent lubrication film break down at extremely high temperatures.  

Why is it necessary to change the motor oil?

Over time oil loses its ability to provide the required protection, thus regular oil changes are necessary. Oil change intervals vary depending on factors such as engine design, engine wear, infrequent usage, ambient temperature, fuel quality and type, etc.

With time and distance driven, motor oils are affected by such factors as fuel dilution, heat cycles, condensation and mechanical shear forces, etc.

Tasks and added values of motor oil

Lubrication
Lubrication of mechanical engine components is an oils most important function. An oils strong lubrication film prevents metal-to-metal contact while reducing friction between internal components.

Cooling
A motor oil contributes to cooling by removing heat from areas such as cylinder walls and piston rings. This is necessary for overall protection of sensitive areas and to keep the engine from overheating.

Cleaning
Eliminating combustion by-products, metal debris, sludge and deposits from engine internals is another motor oil function. A motor oil needs to help clean engine internals and transport residue to the oil filter for removal.

Sealing
Motor oils support piston rings sealing for reduced compression loss, thereby increasing efficiency, and preventing excess oil consumption. A thin oil film on rubber seals reduce wear, overheating and prevent premature leaks.

Corrosion protection
A protective oil film on all internal surfaces prevent corrosion and/or erosion of metals. This protective film prevents oxygen, moisture, and acidic by-products from affecting metals.

Pressurise
Ensuring accurate oil pressure for hydraulically operated systems is also one of the tasks of modern motor oils.

Environmental protection
The use of effective exhaust aftertreatment systems such as particle filters etc. is only possible if modern motor oils with the correct oil specification are used.

Why is it important to use the correct oil?

Every engine design is different and needs to always use a specific oil. A motor oil needs to provide maximized engine and emission system protection during sometimes very long oil change intervals. Full protection can only be guaranteed when an OE approved oil is used.

If using an oil with specifications outside the required parameters, excess wear and reduced efficiency can be expected. Using an oil with an incorrect viscosity may affect a variable valve timing systems ability to control timing and/or cause an increase in fuel usage, due to lower engine efficiency.

An OEM approved oil guarantees full protection and engine efficiency while also making sure emission system components like catalytic converters and particle filters can operate without loss of efficiency. 

Can motor oil help you save money?

Using a high-quality motor oil with the correct OE specifications can save on repairs and prevent premature break-down. Using a cheap oil may save a penny now but is almost guaranteed to cost more later.

Many cheaper oils in the market have their usage and place but they are not always meant to be used in modern cars. When performing an oil change on a modern vehicle, it’s extremely important to use an oil that fulfils all OEM specifications for maximised protection.

By doing so you will guarantee best fuel mileage and engine longevity while also being able to follow extended oil change schedules. A cheap oil may not have the necessary performance reserves to go for extended oil change periods and therefore needs to be changed quite often, which increases costs. A high quality LIQUI MOLY motor oil, on the other hand, frequently exceeds the manufacturer specifications and extends the engine’s service life.

Many LIQUI MOLY motor oils are officially approved by manufacturers.

Additives in the oil

All motor and gear oils use individual additive packages as part of the formulation. Additive packages are matched to the oil specification needed. Some more advanced additive packages can be used to make an oil that meets more than one specification. For an oil to get an official manufacturer approval a high-quality additive package must be used.

What is the difference between a motor oil and a gear oil?

Fundamentally, gear oils carry out the same task as motor oils. But the main difference with gear oils is that they are designed specifically to protect, lubricate, and cool gearing systems that are mainly found in transmissions, differentials and transfer boxes.

These are usually exposed to much higher pressure and shearing forces than an engine oil. Another difference is gear oil is not diluted by fuel input. In principle, gear oils therefore require other ingredients – other additive packages – to be able to fulfil the tasks required of them. 

This article first appeared in issue 2 of Garage Wire Aftermarket magazine.

Have your say!

2 0

Lost Password

Please enter your username or email address. You will receive a link to create a new password via email.